Features
- Power: 80W, Power Supply: 120V, 60HZ Power Cord Length: 6ft.
- 0.39 in. sealing width Material Thickness 10mil
- Equipped with convenient rack to hold sealer when not in use
- Temperature can be regulated from 150 C to 360 F with a quick turn of the knob and contains on and off switch with safety light
- Great for sealing thicker materials and irregular size packaging
Price:
Product prices and availability are accurate as of the date/time indicated and are subject to change.
| Product Information |
Product Description
Constant heat hand wheel sealers that seal plastic material in any configuration with a 10mm seal width. Simply move the PTFE coated wheel along the material whether the material is polyethylene or cellophane. These versatile sealers can make round, oval, square or any unique shape with a textured mesh seal. Note: A few trials may be necessary to determine the correct temperature setting and speed. (90 day warranty)
Easy to Operate: Place the unit on the race and plug into an outlet. Turn on the temperature control knob to the setting that seals the material. Allow the unit to heat up for approximately 10 minutes. Place the material to be sealed on the heat resistant rubber mat and roll the hand wheel across the material.
Hints for Best Results:Always use the smooth heat resistant rubber mat or corrugated cardboard under material to be sealedNever seal on glass, paper or woodRoll the hand wheel slowly and steadily over the material to be sealedAvoid pressing down too hard or rolling too fastAdjust the temperature and/or speed to get the desired sealReplace the hand wheel sealer on the rack when finished sealingTurn off the switch when sealing is completedIf you want a "seal and cut" type of seal, turn the unit so that only the wheel edge comes in contact with the plastic materialAlways remove any bits of accumulated plastic from wheel by using a dry cloth or soft brushAlways unplug the unit before performing any maintenance
